기술
No need to match!Universal universal pci cooler.
Please pull down the hood of the graphics card!The cooler directly cools the graphics card.（Do not remove the heat sink!The fan can be removed or not removed.）
Three fan assembly
Total length about 240MM. Thickness 16MM (a PCI bit)
Main board 3PIN connector, line length about 25CM.
snake skin care line.
Double fan assembly
Total length about 160MM. Thickness 16MM (a PCI bit)
Motherboard 3PIN connector.The line length is about 25CM, snake skin care line.
（See the detailed diagram below）
（The installation diagram）
Install the side of the cooler and install it with screws.
1.Remove the PCI parts.
2.Install the side of the cooler and install it with screws
3.Find the d-type interface for computer power.
4. Use this matching deceleration line.
5.One end of the line is connected to the fan and the other to the power.
6.The cooler will blow on the video card
