Descrizione
Free Shipping XCR3D 5pcs 3D Printer board Part Material detection module for 1.75MM DIY Kit filament detection Sensor with cableDollaro statunitense 12.51/quantità
XCR3D 3D Printer Parts Lerdge Motherboard 3.5″ Color Touch Screen ARM stm 32-bit Control Board with Thermistor DIY Kit MainboardDollaro statunitense 65.36-89.11/pezzo
3D Printer Kit 2M PU White 6mm 2GT Synchronous belt with Steel Core Wire GT2 Synchronous wheel 20 Tooth Bore 5mm with Hex WrenchDollaro statunitense 2.90/set
XCR3D 3D Printer Parts 12V 50W Heating Pipe 6*20mm 24V Silicone Heater for Hotend J-Head 1Meter 2M Heating Tube Kits White 1PCSDollaro statunitense 2.38-2.98/pezzo
XCR3D MK8 Extruder DIY kit 3D Printer Parts PC Plastic Universal Extruder Kit for Makerbot 1.75mm Filament With GearDollaro statunitense 1.98-5.11/pezzo
XCR3D Free Shipping 3D Printer tool 10pcs Bendable Drill Bit for Cleaning of 3D Printer Hotend 0.2mm 0.3mm 0.4mm NozzleDollaro statunitense 2.88/set
XCR3D 3D Printer Parts V6 Hotend for 1.75mm Filament Straight Through Throat 12V 24V Heater 1M 2M Extruder for DIY Reprap KosselDollaro statunitense 6.88-12.95/pezzo
XCR3D printer 3d parts HT-100K ntc thermistor Temperature Sensor 100K Ohm NTC 3950 with Cable for High Temperature Filament 1/2MDollaro statunitense 1.78-2.08/pezzo
Nota: For the nozzles, 0.2/0.3/0.4/0.5mm are for option. If you need other sizes besides the 0.4mm, please leave us a note.
Item details
Nozzle Size：0.4mm for 1.75mm Fliament.
( If you need 0.2/0.3/0.5 Nozzle size , please tell us before the order)
Thermistor： 100K, NTC 3950, 1 meter
Heater wire：12V or 24V, 40W, 1meter.
Teflon tube：1 meter ,Bore ID4mm OD6mm ,white.
Ventilatore：30*30*10mm ,12V or 24V ,2 Spillo ,with Bracket.
V6 Heating Block:
Misurare: 20mm*16mm*11.5mm Material: 6061 aluminium alloy The screw with gasket suited: M3 * 10 and M3 * 4 
V6 Throat Tube: Specifiche: inner hole 2mm; radiating end threaded M7; heated end M6; total length : 22.4mm Material: 316F / stainless steel Scope: 3D-V6 long distance wire; Caratteristiche: Tail part: 4.2mm hole, wearing Φ4 × 2 Teflon tube, reducing friction with the wire during the heat pipe wall. 
V6 Heat Cooling Tube: Specifiche: connection thread M7 Joint connecting thread G1/8 Feeding hole Φ4.2 (with 4 × 2 Teflon tube PTFE) Installation position Φ12 × 3.7 
V6 Nozzle: Dimensioni: 12.5mm * 7mm Material: Copper Nozzle Accuracy: 0.2mm, 0.3mm, 0.4mm, 0.5mm (support 1.75mm) Screw outer diameter: 6mm (Metric M6, tooth length 5.5mm, ID 2mm) Machining error is within 0.005mm. Customization is available. 
V6 Pneumatic Fittings:
Inner diameter: 4mm for 1.75mm filament guiding tube – ID2mm OD4mm PTFE tube use
Thread: 1/8″
Package list:
1. V6 remote hotend kit * 1
2. Cooling fan with Bracket * 1
3. 1 meter Teflon tube * 1
4. 1 meter thermistor&heater wire * 1
